What is setup_maclook.dll?

setup_maclook.dll is usually located in the 'c:\users\%USERNAME%\appdata\local\efsftion\' folder.

Some of the anti-virus scanners at VirusTotal detected setup_maclook.dll.

If you have additional information about the file, please share it with the FreeFixer users by posting a comment at the bottom of this page.

VirusTotal report

13 of the 56 anti-virus programs at VirusTotal detected the setup_maclook.dll file. That's a 23% detection rate.

Scanner	Detection Name
Ad-Aware	Gen:Variant.Symmi.50006
AVG	Agent5.JOB
BitDefender	Gen:Variant.Symmi.50006
Cyren	W32/Trojan.BPIJ-7683
Emsisoft	Gen:Variant.Symmi.50006 (B)
ESET-NOD32	a variant of Win32/Boaxxe.CO.gen
F-Secure	Gen:Variant.Symmi.50006
GData	Gen:Variant.Symmi.50006
Ikarus	Trojan.Win32.Boaxxe
McAfee	Miuref-FFOV!634D57293295
McAfee-GW-Edition	BehavesLike.Win32.Sefnit.tc
MicroWorld-eScan	Gen:Variant.Symmi.50006
Sophos	Mal/EncPk-DW

setup_maclook.dll removal instructions

The instructions below shows how to remove setup_maclook.dll with help from the FreeFixer removal tool. Basically, you install FreeFixer, scan your computer, check the setup_maclook.dll file for removal, restart your computer and scan it again to verify that setup_maclook.dll has been successfully removed. Here are the removal instructions in more detail:

1. Download and install FreeFixer: http://www.freefixer.com/download.html
2. Start FreeFixer and press the Start Scan button. The scan will finish in approximately five minutes.

   
3. When the scan is finished, locate setup_maclook.dll in the scan result and tick the checkbox next to the setup_maclook.dll file. Do not check any other file for removal unless you are 100% sure you want to delete it. Tip: Press CTRL-F to open up FreeFixer's search dialog to quickly locate setup_maclook.dll in the scan result.

   

   

   c:\users\%USERNAME%\appdata\local\efsftion\setup_maclook.dll

   
4. Scroll down to the bottom of the scan result and press the Fix button. FreeFixer will now delete the setup_maclook.dll file.

   
5. Restart your computer.
6. Start FreeFixer and scan your computer again. If setup_maclook.dll still remains in the scan result, proceed with the next step. If setup_maclook.dll is gone from the scan result you're done.
7. If setup_maclook.dll still remains in the scan result, check its checkbox again in the scan result and click Fix.
8. Restart your computer.
9. Start FreeFixer and scan your computer again. Verify that setup_maclook.dll no longer appear in the scan result.

• Privacy Policy